NEW CHOICE 355NG3 TRAILER

 2025 CHOICE 355NG - 3 AXLE 55-TON NON-GROUND BEARING 

LOWBOY TRAILER 

• Overall Length: 53’ 
• Overall Width: 102" 
• Capacity: 110,000lbs 
• King Pin Setting: 34” & 16” 
• Swing Clearance: 108” & 90” 
• Deck Length: 26' 
• Loaded Deck Height: 22” w/ 6” ground clearance; adjustable 
• Gooseneck Type: Low profile scraper gooseneck, arched, hydraulic 
• detachable, 
• non-ground bearing, air-actuated locking pin 
• Hyd. Lift Cylinders: Two (2); control valve located on driver side of 
• gooseneck 
• Hydraulic Power: Runs off wet kit (5 TO 12 GPM hyd. requirement) 
• Adj. Ride Heights: Yes; 5 positions 
• Hyd. Neck Support: Yes 
• Main Deck: 4-beam construction, fully cambered fabricated beams, 100KSI hightensile 
• T1 steel; expanded metal tool tray at front of main deck 
• Decking: Raised apitong flooring; center deck open standard 
• Ramps: Front loading ramps, folding style with traction cleats for loading tracked equipment 
• Bucketwell: Recessed bucketwell cutout at rear of main deck 
• Boomwell: Recessed boomwell cutout over axles and bumper 
• Outriggers: Heavy-duty pull-out outriggers at beginning of load bed, removeable 12” 
• swing-type outriggers evenly spaced the entire length of main deck 
• Lashing Rings: 1” forged bent d-rings, evenly spaced the entire length of main deck 
• Flag Holder Slots: One pair located at front of load bed and one pair located on rear bumper 
• Rear Deck: Bolster style, open wheels standard 
• Flip Axle: Reinforced sub-frame; connections for flip axle included 
• Suspension: Air-ride; 25,000# capacity; automatic ride height controls; manual override; raise and lower valve 
• Axles: 25,000# nominal axles; oil-lubricated hubs; 77.5” track width 
• Axle Spacing: 55” 
• Lift Axle: Equipped on third axle standard 
• Wheels: Steel disc, hub-piloted type, white 
• Tires: 255/70R22.5 Load Range H 16-ply steel-belted radial 
• Brakes: 16 ½” x 7” drum brakes, 4S2M ABS-equipped, automatic slack adjusters, 30-30 chambers on all axles 
• Electrical: D.O.T.-approved, sealed 12V electrical and lighting system, LED lights, 3 tail lights per side, mid turn 
• Paint: Sandblasted, painted with epoxy primer and polyurethane topcoat, black 
• Options: 
• Wheels outer: 8.25 x 22.5 10-Hole pilot mount aluminum polished wheels 
• 4” amber strobe light