Used

DRAGON 130 BBL VAC TRAILER

This product is appoved for:
zero down
seasonal skip payments
90 day deferred payments
Apply Now
No items found.
$
0.00
FET tax of 12% is not applicable

130 BARREL NON-CODE VACUUM TRAILER

  • TYPE: VACUUM TANK TRAILER NON-DOT SPEC
  • CAPACITY: 5460 GALLONS, PLUS 2%
  • ICC MC: NONE
  • COMMODITY: UNSPECIFIED OILFIELD FLUIDS
  • DESIGN PRESSURE: 15 PSI INTERNAL, 22 INHG EXTERNAL, 23 PSIG HYDROSTATIC TEST
  • SHELL: ¼ PL x 60 IN O.D.
  • HEAD: ¼ PL NON CODE ASME SHAPE
  • BAFFLE: 2 – ¼ PL FLAT FLANGED AND DISHED EACH WITH INTERIOR SHELL REINFORCEMENT RING
  • STIFFENER: 3/8" x 2 ½ ROLLED RINGS (8) EXTERNAL
  • WELDS: INTERNAL ROOT, EXTERNAL SUBMERGED-ARC
  • COMPARTMENT: SINGLE  
  • SUSPENSION: STANDARD SPRING W/ 8 LEAF LOW ARCH SPRINGS
  • AXLES: 22,500 LB ROUND W/ OUTBOARD DRUMS (2)
  • WHEELS: 10 HOLE STEEL DISC HUB PILOT
  • TIRES: 11.00 x 24.5 RADIAL  
  • BRAKES: 16 ½ x 7 WITH SPRING PARKING, AUTO SLACKS, ABS BOTH AXLES
  • UPPER COUPLER: BOLT ON ADJUSTABLE
  • LANDING LEGS: 2 SPEED, HEAVY DUTY, HIGH CAPACITY LIFT
  • BUMPER: 4 x 8 TUBE WITH TOW EYE
  • FENDERS: FULL LENGTH FORMED HOSE PAN (10 GA) WITH ¼"
  • WALKWAY: FORMED SUPPORTS. DRIVERS SIDE SAFETY WALKWAY WITH HANDRAILS AND LADDER
  • TOOL BOX: 18 x 18 x 36 ON DRIVERS SIDE WITH SEALED DOOR  
  • MUD FLAPS: ANTI SAIL
  • OUTLET: TWO 4" BUTTERFLY VALVES AT REAR WITH A WEDGE SUMP
  • RELIEFS: 1 ½" VACUUM RELIEF, 2" PRESSURE RELIEF, BOTH LOCATED AT TOP FRONT OF BARREL, 2" BLOW DOWN LINE AT REAR  
  • MANWAYS: FOUR LOACTED ON TOP, ONE ON REAR HEAD, ALL 21" DOMED STYLE WITH PLATED SWING BOLTS AND WING NUTS  
  • SHUT OFF: BALL TYPE PRIMARY IN FRONT MANWAY, BALL TYPE SECONDARY 12 GAL ON DRIVERS SIDE FRONT WITH DRAIN  
  • LIGHTS: FULL DOT LIGHTS, SEALED LIGHTS, HARNESS AND JUNCTION BOX WITH TERMINAL STRIP, TWO REAR WORK LIGHTS WITH INTEGRAL SWITCHES  
  • SIGHT GLASS: 2" SIGHT GLASS FITTINGS IN FRONT AND REAR HEAD. 1 ½" PLASTIC SIGHT GLASS TUBE INSTALLED IN REAR HEAD WITH CLEAN OUT TEES AND 2" BALL VALVES TOP AND BOTTOM
  • COATING: ALL SURFACES WHITE METAL STEEL GRIT BLAST, 2.5 MIL PROFILE (SP-10), INTERIOR LINED WITH CHEMICAL RESISTANT 100% SOLIDS EPOXY LINER, 10-15 MIL DRY FILM THICKNESS. EXTERIOR COATED HIGH BUILD EPOXY PRIMER AND COLOR COATED WITH HIGH SOLIDS POLYURETHANE, 4-6 MIL DRY FILM THICKNESS
$
0.00
FET tax of 12% is not applicable
Suggested next steps
Contact us
Schedule a meeting

Meet with a sales rep to answer all of your questions
Schedule now