New

CPS 4B240A200 Lightweight Bottom Dump

This product is appoved for:
zero down
seasonal skip payments
90 day deferred payments
Apply Now
CPS 4B240A200 Lightweight Bottom Dump
No items found.
$
49900.00
FET tax of 12% is not applicable

CPS, *** NEW STYLE LWBD *** SEMI-TRAILER LIGHTWEIGHT BOTTOM DUMP

Coupler, door, pushblock, front & rear K-bracing & side walls with 2 vertical

side supports. Aluminum front connection box.*Lightweight simplified assembly

(Capacity of 20 cu/yards single hopper) 23 cu/yards to the top of bangboards)

Dimensions
  • Length: 40'-0" Lightweight bottom dump
  • Width: 96"
  • Height: 10' with bangboards / 9' 1" without bangboards
  • Coupler Height: 48"
Sub-Structure
  • Fifth Wheel: Oscillating fifth wheel with standard king pin
  • King Pin Location: 18" (standard)
  • Upper Hopper: Upper hopper 10 & 12GA (standard lightweight)
  • Lower Hopper: Lower hopper 10GA (standard lightweight) 54" X 108" opening - Sides 12GA, Ends 10GA
  • Door Material: 3/16 80W (standard doors)
  • Gate Style: Commercial grade steel with slide locks.
  • Bang Boards: Wood bang boards
  • Pushblock: Welded push block with certified under ride
  • Bottom Rail: 4" X 6" X 3/16" HSLA tube
  • Top Rail: 4" X 6" X 3/16" HSLA tube
Tarping System
  • Tarp Style: CPS, Tarp flip electric mesh black 16' (for 40') Roll Rite TM400 Bottom Dump application. Manac # 984 1799
Electrical
  • Main System: LED - ICC & DOT approved sealed beam lighting system
  • Front Connector: 7 way (SAE J560)
  • Additional Front Connector: 6 way- Wired for gate control
  • Mid-Flashers: One lamp including side marker and flasher, each side at middle point, amber.
Landing Gear

Drop legs/Stiff leg 4" X 4" square (galvanized)

Mecahnical
  • Axle Qty: Tandem
  • Axles: Hub piloted 25K axles : 1ABS 1NON ABS 5" tubular with HN spindle
  • Suspension: Tandem air ride suspension 50" spread
  • Track: 71.5" (96" width)
  • Window Deflector: Standard dirt deflector (galvanized)
  • Brakes: 16 1/2" X 7" cam brakes
  • Bearings: HM 218248 and HM 212049
  • Slack Adjusters: Meritor, automatic, 28 splines
  • Seals: Stemco, "Guardian" type, with "Gearlube" mineral oil, SAE 80W90
  • Brake Chambers: T.S.E. brake, "Omnibrake" (30-30)
  • Tire Size: 24.5 Hub Piloted (plant choice radials) SUMITOMO ST727,H/16 PLY, 11R24.5
  • Exterior Wheel: 11R24.5 16PLY W/STEEL WHEEL
  • Interior Wheel: 11R24.5 16PLY W/STEEL WHEEL
Air System
  • Gate Control: Air controlled: electric controlled from the cab of truck and manual from the ground. (VERSA VALVE HAND CONTROL)
  • Air Valves (ABS): 2S1M Tandem
Finishing (Paint)

Shot blasted, acid based wash with rust inhibitive rinse.

One coat of epoxy primer and one coat polyurethane top coat.

Color: White

Reflective Tape

Conspicuity striping in compliance with FMVSS/ CMVSS 108.

Gray and red each side, fully covers rear sill and pushblock.


$
49900.00
FET tax of 12% is not applicable
Suggested next steps
Contact us
Schedule a meeting

Meet with a sales rep to answer all of your questions
Schedule now